Follow us: Narula Exports Narula Exports Narula Exports

Menu

Model No.: 56-0105, Radiant Warmer

Radiant Warmer

Table, resuscitation, newborn, with accessories

Technical Parameters:

  • Mobile newborn resuscitation table with radiant warmer
  • Sturdy and stable construction on 4 antistatic bal-bearing swivel castors, 2 with breaks
  • Two side handles facilitate positioning
  • Table surface, approx: 0.60 x 0.90 m ( W x L)
  • Side panels in transparent acryl, drop down and lockable
  • With one storage drawer, under table surface
  • Integrated support for two 10L oxygen bottles
  • Side rails to the table surface allows for mounting of accessories
  • Fixed-height hood above the table integrates heating element and overhead light
  • Vertical column integrates controls and displays
  • Overhead examination light : 2x40 W halogen spot
  • Heating element: emitter with parabolic reflector and protected by metal grid
  • Preset skin temperature, range approx 34 to 38°C, increments 0.1°C
  • Temperature preset drives heater output in servo mode
  • Easy switch between servo and manual mode
  • Skin temperature monitoring via sensor, range 30 to 42°C (sensitivity 0.2°C)
  • Sensor thermistor based and factory calibrated
  • Preset heater output: 0 to 100%, in 10% increments
  • Integrated timer, preset: 1 to 59 min with up/down count feature, increments 1 min
  • Auto-off at time elapse
  • Audiovisual alarm on skin temperature (± 0.1°C of preset value) and time (elapse)
  • Large LED display shows: Heater output preset in Watt
  • Mode (servo or manual)
  • Preset skin temperature
  • Actual skin temperature
  • Air temperature
  • Elapsed or remaining time
  • Display reports system errors such: sensor malfunction, timer failure, low/high temperature
  • Mattress covering entire table surface, thickness 5 cm
  • Cover is waterproof, flame retardant and resistant to common disinfection and cleaning solutions
  • Trendelenburg and Reverse Trendelenburg ± 20°.
  • Provided with X-Ray cassets holder
  • Dimensions: 900 (L)x 800(W) x 1900(H) mm.
  • Power requirement 220 V/50 Hz
  • Power consumption approx 800W

Supplied with:

  • 1 x Mattress
  • 2 x Reusable skin temperature probe, incl. connection cable and plug
  • 1 x Spare Heating Element
  • 1 x Set of spare fuse
  • Clear instructions for use/ diagrams for assembly in English languages, list of accessories/parts
 

Model No.: 56-0105, Radiant Warmer

Radiant Warmer

Digital Controller:

  • The digital, Micro Processor
  • based controller comes with a full spectrum of features.
  • Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
  • Dual digital temperature displays allow easy visualization of patient temperature and set point.

Control Panel:
Nataso Radiant Warmer comes complete with automatic manual /baby (Servo)/Air modes.

  • In addition, the Skin / Air temperature display is larger than other set temperature display.
  • Skin temperature display can be converted form °C to °F by the push of a button.
  • Vertical column integrates controls and displays
  • LED & LCD Screens are provided for more information and display shows:
    • Heater output preset in%
    • Mode (servo or manual)
    • Preset skin temperature
    • Actual skin temperature
    • Alarm conditions

A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of:

  • Power Failure
  • High Temp./ Low Temp.
  • System Fail
  • Probe Failure
  • Timer
  • Heater Fail / ON only visual alarm provided

Heater Assembly
The Parabolic heater assembly located above the centre of the support structure (Hood) protected by metal grid.
It consists of 2 x 50W, Halogen integral examination light with dimming function and a 650 watts heating system (Silica or quartz / Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures.
Preset heater output: 0 to 100 %, in 10 % increments Temperature preset drives heater output in servo mode

Air Mode
The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the Al R temperature goes above 39°C irrespective of what the skin temperature is at the time of event.

Manual Mode
The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Skin Temperature probe

  • Preset Range : 34 to 38°C
  • Accuracy : ± 0.1°C
  • Monitoring via sensor range : 30 to 42°C
  • Sensitivity : 0.2°C
  • Sensor thermostat based and factory calibrated

Baby Bed:
The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient.

Additional Features:
If needed the unit can be programmed by the user itself for any of the following features:

  • Count Up / Down Timer (Elapsed or Remaining time).
  • Check Baby Alarm.
  • Pre warming mode.
  • Integrated timer, preset: 1 to 59 Min with Up/down count feature, increments 1 min.
  • Auto-off at time elapse
  • Mobile freestanding fixed-height overhead radiant warmer

Castors:
The system is fitted with 4" high quality anti static swivel castors having brakes in front 2 castors.

Technical Specification:
Overall Dimensions

  • Height - 1830mm
  • Length - 920mm
  • Width - 790mm

Electrical Specification:

  • Power Supply - 230V / 50Htz
  • Power - 650 Watts
  • Fuse - 5 Amp.
 

Model No.: 56-0110, Resuscitation Table with Radiant Warmer

 Resuscitation Table with Radiant Warmer

Features:

  • Mobile newborn resuscitation table with radiant warmer
  • Two side handles facilitate positioning
  • Integrated support for two 10 L oxygen bottles
  • Side rails to the table surface allows for mounting of accessories
  • Fixed-height hood above the table integrates heating element and overhead light
  • Vertical column integrates controls and displays
  • Overhead Examination Light: 2 x 40 W halogen spot
  • Heating Element: Emitter with parabolic reflector and protected by metal grid
  • Preset Skin Temperature Range: 34 to 38 C, increments 0.1C
  • Temperature preset drives heater output in servo mode
  • Skin temperature monitoring via sensor range: 30 to 42 C (sensitivity 0.2 C)
  • Sensor thermistor based and factory calibrated
  • Preset heater output: 0 to 100 %, in 10 % increments
  • Integrated timer preset: 1 to 59 min with up/down count feature, increments 1 min
  • Auto-off at time elapse

Our open care systems allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self check on the electronic circuitry skin/ air / manual control.

Control Panel
This Open care System comes complete with automatic manual and baby (Servo) modes.
In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form °C to F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of:

  • High Temp./ Low Temp.
  • System Fail
  • Probe Failure
  • Power Failure
  • Timer
  • Visual alarm provided

Heater Assembly:
The heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures.

Manual Mode:
The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed:
The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient.

The First Breath:
The open care system combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1,5 and 10 minutes have elapsed.

Castors:
The system is fitted with 4" high quality castors having brakes in front 2 castors. Optional: antistatic castors

Storage:
The unit comes fitted with two drawer system which slides out for keeping consumables.

Additional Features:
If needed the unit can be programmed by the user himself for any of the following features: (a) Count Up / down Timer, (b) Check baby Alarm, (c) Pre warming mode.

Dimension:

  • Height : 1924mm
  • Length : 1090mm
  • Width : 760mm

Electrical Specification:

  • Power supply : 220V / 50Htz
  • Heater Power : 650 Watts
  • Fuse : 5 Amp.
 

Model No.: 56-0205-ET, Infant Radiant Warmer with Resuscitation Table

Infant Radiant Warmerwith Resuscitation Table

  • Mobile, mounted on 4 swiveling antistatic castors wheels, all 4 with brakes.
  • Infant radiant warmer for neonatal thermoregulation with quartz heater, with gas module and built-in suction unit controlled from the main panel.
  • Table surface with mattress with infant head/shoulder support
  • Mattress-padding: foam density approx. 21 - 25 kg/m3
  • Mattress cover: removable with zipper, waterproof, washable, resistant to cleaning with chlorine based solution and flame retardant
  • Side boards made of transparent acrylic, drop down type and lockable
  • Integrated T-piece resuscitator with adjustable controls of PIP and PEEP.
  • With built-in blender for controlling levels of Oxygen concentration from 21% to at least 60%
  • With two storage drawers
  • Side rails allow for mounting of accessories
  • Hood suspended above the table integrates heating element and overhead light
  • Overhead light: 2 x 50W halogen spot, with dimming function
  • Base is height adjustable with electrical foot switches on both sides.
  • Integrated support for two 5 Liters empty oxygen cylinders.
  • Display with LCD screen full color for displaying graphics and trends of air temperature, skin temperature (main temperature and peripheral temperature), Oxygen concentration in the environment, phototherapy treatment time, newborn’s weight, SpO2, heart pulse and newborn data.
  • Control unit has flow meter and displays pressure
  • Heating element: emitter with parabolic reflector and protected by metal grid.
  • Control unit allows air and skin temperature preset (LED indicator) and drives radiant heater Output (servo and manual).
  • Equipped with Oxygen analyzer module to monitor O2 levels at the ambient. Combined with an acrylic helmet, which can be used to administer a closed environment with higher concentrations of O2.
  • Integrated timer: 1 to 59 min, with count-up and count-down feature.
  • Temperature range, skin: 34 to 38 deg C (user presettable).
  • Bed can tilt continuously up to ± 12° for Trendelenburg proclive & decline positions, through electric command buttons.
  • Monitoring of skin temperature by means of sensor, range: 30 to 42 deg C.
  • Heater output: 0 to 100% in increments of 5%.
  • Built-in SpO2 module to measure O2 saturation and heart pulse. Information is displayed on the LCD screen.
  • Audio and visual alarms for high and low temperature, as well as for: Power failure , Probe failure or disconnected, Heater failure, Temperature higher or lower than set temperature , Oxygen concentration higher or lower than set, SpO2 probe failure or disconnected.
  • Control unit: audiovisual alarms according to timer and temperature presets avoiding overheating.
  • Display reports systems errors, sensor failure.
  • Power requirement: 220 V/50 Hz.

Supplied with:

  • 1 x Mattress.
  • 1 x Skin temperature probe (including connection cable).
  • 1 x Spare skin temperature probe (including connection cable).
  • 1 x Spare heating element.
  • 2 x Empty 5 L Oxygen cylinders.
  • Eye pads for use during phototherapy – 40 pcs.
  • Skin adhesive for fixing probe – 100 pcs.
  • Acrylic helmet – 1 set of 3 sizes.
  • 1 x Spare set of fuses.
 
Go to top