• A full complement of alarm provides safety convenience with both audible and visual indicators.
  (a) Skin probe failure. ,(b) Temperature High, (c) High temperature cutoff, (d) Air Probe failure, (e) Temperature Low,(f) Power failure, (g) System Failure

• Skin Temperature display can be converted from °C to °F by push of button.
• A big LCD is provided for more specific information & visualization of the heater power in different modes.
• Humidification is provided with the help of water container which is fitted in front of incubator.
• Humidity chamber can be easily removable
• Front Panel which can open, fully lockable semi iris opening
• Oxygen can be adjusted from 21% to 99% from Oxygen cylinder via bull nose Connection
• High Performance replaceable Air filter
• Stand made of mild steel, epoxy powder coated
• Height adjustment from 900 to 1100mm
• Baby incubator equipped with two lockable cupboards

SKIN PROBE / AIR PROBE:
Skin probe/Air probe is made of highly sensitive sensor and is interchangeable which does not need field calibration, the probe is made up of silicon sheathed cable, which allows easy cleaning.

Technical Specifications:

• Canopy : 90 W x 50 D x 40 H (cm) (approx)
• Mattress (Waterproof and easily removable) : 550 x 390mm (approx)

Physical Parameters:

• Height : 1500 mm
• Depth : 500 mm
• Width : 1100 mm
• Working level from ground : 900 mm
• Baby tray is tilt on either side : 10°
• Weight : 70 Kg (Approx)
• Castors : 4 x125 mm castors with brakes

Recommended Environmental Specifications:

• Operating temperature range : 20°C to 39°C
• Storage temperature range : -25°C to 60°C
• Operating humidity range : 0 -100% RH (Adjustable)
• Noise Level : 55db inside hood, 45db in open environment

Skin Temperature Probe:

• Range : 25°C to 37°C, Override Mode 37°C to 39°C
• Accuracy : +/- 0.3°C within range
• Resolution : 0.1 °C
• Probe interchangeability : +/- 0.3°C (Servo)
• Infant required temperature range : 32 °C to 38°C

Air Temperature Probe:

• Range : 25 °C to 39°C
• Accuracy : +/- 0.5°C within range
• Resolution : 0.1 °C
• Probe interchangeability : +/- 0.5°C (Servo)
• Infant required temperature range : 28 °C to 35°C

Electrical Specifications:

• Electrical Supply : 180 V to 240 V, 50 / 60Hz
• Power consumption with Heater at max. output : 500 W

Electrical Safety:

• As per IEC 601-1 for Medical Equipments
• Note: Best results obtained if air connective current is low.

Accessories:

• IV Pole : 1 No.
• Oxygen Flow meter (Bull Nose Type) : 1 No.
• Mattress: 1 No.
• Lockable Storage Drawers : 2 Sets

• Full visibility & accessibility of the baby is provided by the designed of acrylic hood.
• A full complement of alarm provides safety convenience with both audible and visual indicators.
  (a) Baby probe failure, (b) Air Probe failure, (c) 1°C temperature High, (d) 1°C temperature Low, (e) High temperature cutoff, (f) Power failure, (g) Humidity control Alarm
• Skin Temperature display can be converted from °C to °F by push of button.
• A big LCD is provided for more specific information & visualization of the heater power in different modes.
• Humidification is provided with the help of water container which is fitted in front of incubator.
• Average oxygen input concentration range 4-15lts/min or 25-70%.
• Weight Measuring & X-ray facility without removing baby.
• Head end raise facility with auto-lock.
• Air velocity less than 10cm /Sec with inner wall.
• Double wall canopy with six hand ports.
• Servo control for oxygen with integrated monitoring.

BABY PROBE / AIR PROBE: Baby probe/Air probe is made of highly sensitive sensor and is interchangeable which does not need field calibration, the probe is made up of silicon sheathed cable, which allows easy cleaning.

OTHER FACILITIES: 1.1V Stand provided, 2. Storage drawers provided

TECHNICAL SPECIFICATIONS: Gel Mattress : 550 x 390 x 40mm

PHYSICAL PARAMETERS:

• Height : 1500 mm
• Depth : 500 mm
• Width : 1100 mm
• Working level from ground : 900 mm
• Baby tray is tilt on either side : +/- 80°max
• Weight : 70 Kg (Approx)
• Castors : 125 mm with 2 brake wheels and 2 non-brake wheels

RECOMMENDED ENVIRONMENTAL SPECIFICATIONS:

• Operating temperature range : 10°C to 40°C
• Storage temperature range : -25°C to 60°C
• Operating humidity range : 0 -100% RH

SKIN temperature PROBE:

• Range : 32°C to 38°C
• Accuracy : +/- 0.3°C within range
• Resolution : 0.1 °C
• Probe interchangeability : +/- 0.3°C (Servo)
• Infant required temperature range : 32 °C to 38°C

AIR TEMPERATURE PROBE:

• Range : 28 °C to 38°C
• Accuracy : +/- 0.5°C within range
• Resolution : 0.1 °C
• Probe interchangeability : +/- 0.5°C (Servo)
• Infant required temperature range : 28 °C to 35°C

HUMIDIFICATION:

• Range : 10-75%
• Maximum CO2 concentration : 0.2%
• Noise level : <49dB
• Servo Mode : 40 -80%

ELECTRICAL SPECIFICATIONS:

• Electrical Supply : 115V /180 V to 240 V 50 / 60Hz
• Power consumption with Heater at max. output: 500 W
• Voltage Stabilizer : 220V, 0.75KVA.

ELECTRICAL SAFETY:

• As per IEC 601-1 for Medical Equipments
• NOTE: BEST RESULTS OBTAINED IF AIR CONNECTIVE CURRENT IS LOW.

• Low Temperature
• Skin Temperature display can be converted from C to F by push of a button.
• A big LCD is provided for more specific information & visualization of the heater power in different modes.
• The High & Low Temperature alarm setting can be adjusted according to the patient condition.
• Humidification is provided with the help of two water trays provided at the back of the unit.
• Three side trays provided at the bottom of the unit to keep consumables.
• The unit rests on four big castors with brakes in the front castors.

Specification:

• Servo Controlled Incubator to have a large Perspcx hood with excellent dual viewing panels, to have an integrated sensor module to collect air and skin temperatures, oxygen, humidity and patient weight information and pass this information to the controller.
• The sensor module to have a visual alarm to complement the controller alarm.
• The mattress base to be contoured, x-ray translucent and to be 406 x 800mm to allow caring for twins in the one unit if necessary and to have an in mattress scale.
• Able to tilt + or -12 degrees.
• The hood to have four doors, two on either side and two 'iris' openings one at each end, with 4 tubing access ports.

• The base of the unit to have the controller module to accept information from the sensor module and to store the information, to act on this and regulate the temperature, oxygen level and humidity to preset levels.
• Have an alarm for all of these parameters with a low initial alarm intensity to avoid undue disturbance.
• All information graphically trended for 2, 4, 6, 8, 16 and 24 hours,
• The infant weight to be trended from up to 7 days.
• Oxygen able to be calibrated from 21 % to 100%,
• The humidity module front loading and need filling daily.
• The mattress tilt control knobs on the base.
• The stand to be variable in height to allow the incubator to be between 132cms and 152.4cms,
• Have underslung storage containers which can be rotated to allow easy access,
• Two instrument trays and a strip of 6 power outlets

Accessories:

• Monitoring shelf
• Telescopic iv stand
• Cylinder holder
• Ventilator tube support