56-0125
Dimensions in Inches (Approx.)
- Height without hood: 39”
- In collapsible mode : 29”
- Height with hood : 49”
- Width : 23”
- Length : 53”
- Backup : 60-90mns
- Size of Castors : 5″ PU
- Sealed maintenance free battery : VRLA Batteries
- Charge time : 10hrs. (Approx.)
- Weight : 75kg
NOTE
Optional: Backup of the unit can be increased as per user requirement.
Control Panel
- The controller features a display that is easy to read at any angle during transport.
- Display for air and skin temperature help you maintain, control and provide essential information about the infant’s thermal support.
- Microprocessor controlled system with air and skin modes of operation.
- Display both temperatures i. e. Air/Skin temp along with Set temp.
- Soft touch operation with digital display and extensive alarms.
Alarm
- Skin temp low/high
- Probe failure
- Low battery
- Power failure
- System Failure
Timer
- In case of high temperature i.e. above 38°C, heater automatically cuts off thus ensuring baby’s safety.
- Can be used on manual mode as well.
Collapsible Stainless Steel
- With trolley 2/4 number gas springs for ambulance and in hospital transport purposes.
- Gas spring system allow the stand to collapse when the lever is pulled and trolley is pressed from both the sides.
Easy Access
- Quick and easy access through the side access door and front port holes.
- The side door folds down and the mattress retracts out from the hood to access for emergency procedures.
- The door and tubing ports offer ventilator tubing support.
- Infant restraint strap attached to the baby bed.
Performance Characteristics
- Temperature set range : 32°C-39°C
- Temp variability : 1.0°C
- Temp uniformity : 1.0°C
- Air filter : Removes airborne particles & dust
Power Source
- Transport incubator operates on AC or DC power using AC when available or switching to its internal battery when necessary.
- Battery : The batteries used in the system are 12-volt 18ah.
- Sealed maintenance free VRLA batteries.
- Charge Time : 8-10 hrs. per battery from full discharge.
- Hood options : Standard single wall/double wall hood (on demand).
- Chassis Body : Plastic (fibre) to shock proof the system
Standard Feature
- Single Wall Hood
- Skin temperature probe/Air temp. probe
- Access doors
- 1 baby belt
- Collapsible trolley
Optional
- Examination lamp
- 2 disposable infant restraint straps
- 1 iris port
- 6 tubing ports
- Accessory shelf Suction, Oxygen cylinder, pressure regulatory assembly, Flow Meter, Remote Controlled movement of the Trolley.
- Battery condition status : single led indication of low battery condition on the side panel
- Power mode : illuminates AC, DC or external DC
- Air/Baby temp°C : Displays incubator air temp/baby temperature
*Customizable as per requirement.
*T/C
*T/C
