56-0109
HEATER ASSEMBLY
The heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica/ quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed.
The heater can be swivelled in either direction for taking X-ray and doing procedures.
The Heater is also equipped with 15 LED Phototherapy on both side to provide light intensity effective on the baby bed.
AIR MODE OPTIONAL
Comes with Air Sensor, added security cover with exclusive feature of switching the heater in case the air temperature goes above 39 ºC irrespective of what the skin temperature is at the time of event.
LED PHOTOTHERAPY OPTIONAL
Comes with highly efficient and bright 12/15 LED on each side of heater. The strong Lux of 24/30 LEDs cure jaundice in baby rapidly.
MANUAL MODE
The system automatically start heating from 40% in manual mode and same can be changed through setting up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.
STANDARD COMPOSITION
- Temperature Control Mode: Pre warm, Automatic, Servo control & manual control
- Advanced microprocessor control system with self check on the electronic circuitry skin / air / manual
- A big LCD is provided for more information and visualizations of the heater power in manual and servo modes.
- Skin temperature display can be converted from ºC to ºF
- Instant Parameter Display: set temp, skin temp, heat power rate;
- Built-in APGAR Timer and >37°C preset function
- Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override
- Tilting Bed with Rotary Radiant Head
- X-ray Cassette Tray under infant bed, examination light of high luminance
- Use anti-blast quartz infrared tube as radiant heating source.
| Technical Specification | ||
|---|---|---|
| Power | AC 110 / 220 V, 50Hz / 60Hz | |
| Input Power | ≤1000VA | |
| Heated System | Silica/Quartz/Ceramic Heater | 650 watts |
| Phototherapy | Heater is also equipped with highly eficient and bright 12/15 LED on both side of heater to provide light intensity effective on the baby bed | |
| Fuse | 5 Amp | |
| Light Source | High Bright Blue/White LED's | |
| Wavelength | 450- 470μm | |
| Irradance | < 35 μw/cm/nm. | |
| Timer | Count Up/ Down | |
| Instant Parameter Display | Set temp, skin temp, heat power rate. A big display is provided for more information and | |
| visualization in servo and manual mode | ||
| Temperature Control Mode | Pre - warm, auto, manual mode, baby mode | |
| Temperature control range and relative specification | Control mode | Pre-warm mode, auto, manual mode, Servo mode |
| Temperature control range | 25°C ~ 37°C, for set temperature ≤37°C | |
| 37°C ~ 38°C, for set temperature >37°C | ||
| Skin temperature sensor measure range | 25°C~40°C | |
| Air temperature sensor measure range | 25°C~42°C | |
| Deviation between sensor measure temperature and control temperature. | ≤0.5°C | |
| Skin Sensor Precision | ≤0.3°C | |
| Bed surface temperature Uniformity | ≤1°C | |
| Temperature Rise Time | ≤45min | |
| Baby bed Inclination | Tiltable ±12 deg | |
| Environment Temperature (It is a suggestion that please do not use outside of the allow environment.) | Operate Temperature Range | 18°C~30°C |
| Store Temperature Range | -20°C~+55°C | |
| Alarm | Sensor failure alarm | Alarm with audible and visual when sensor open circuit, short circuit or disconnect, cut off power |
| Temperature alarm | Alarm with audible and visual when displayed temperature approach above the set temp. | |
| Deviation Alarm | After temperature equilibrium, alarm with audible and visual when displayed temperature was 1°C above or below control temperature, cut off power if above 1°C | |
| Environment Humidity | Operate humidity range | 30%RH~75%RH |
| Store humidity range | ≤93%RH | |
| Atomspheric Pressure | Transport and Store atmospheric pressure range | 500hPa~1060hPa |
| Operate atmospheric pressure range | 700hPa~1060hPa | |
| Stream velocity | Ambient environment stream velocity | ≤0.3m/s |
| Mattress Temp. Uniformity. | ≤2.0°C | |
| Temp. rise time Heat output indicate | ≤45 min 0~100% | |
| Radiant box horizon angle adjust range | 0~±90°step-less | |
| Mattress Tray Size | 68cm×56cm (Approx) | |
| Mattress tilt adjust range | 0~±12° step-less | |
| Mattress Tray Max. load | 10 kg (Approx) | |
| Transfusion pole Max. load | 2 kg | |
| Shelf Max. load | 2 kg | |
| X-ray | Yes | |
| APGAR Timer | Yes | |
| Temperature deviation alarm | +1.0°C | |
| Over temp. alarm | ≤38.0°C( or above set temp.) | |
| Pressure adjust range | Yes | |
| Operating noise | Yes | |
| IV Pole | Yes | |
| Space for Monitor | Yes | |
| Light Source | High Bright Blue/ White LED | Wavelength – 420- 480 μm |
| Irradiance <35μm | ||
| Storage | The unit comes fitted with slides out for keeping consumables | |
| Caster | The system is fitted with 4 high quality casters having brakes in front two casters. Optional : Antistatic caster | |
| Accessories Standard | Skin Probe / Air Probe, Mattress, Casters | |
| Optional | Suction Unit, Resuscitation Unit, Blender, Oxygen Cylinder/Flow Meter | |
